SaniSanity SteriLux UVC Germicidal Disinfection Lamp for Home & Office Safety

List price: $250.00
$199.77
You save: $50.23 (20%)
Save 20%
361-STERLSIL1
In stock
+
Buy now with 1-click
Shipping time and rates:

DISINFECT YOUR ENVIRONMENT SMARTER. Be Safe - Be Smart - Prevent the spread at home & at work. Sterilux99 can sanitize both the air and surfaces.

Sterilux99 UVC, germicidal ultraviolet (UV) light, reduces the person to person transmission of viruses through the air, by killing the viruses while they are in the air as well as on surfaces exposed to UVC light rays. Sterilux99 deactivates the DNA of bacteria, viruses, and other pathogens and thus destroys their ability to multiply and cause disease.

Sterilux99 UVC lamp can kill up to 99.9% of most viruses, bacteria, yeasts, and mold spores and help prevent future mold growth. Steri Lux99has one of the shortest wavelengths, highest energy, and can kill pathogenic microorganisms in the air and on surfaces. This makes the UVC spectrum the most efficient for killing viruses and bacteria. Sterilux99 has low energy and strong penetrating power, so the disinfection site must be fully exposed to ultraviolet light.

Sterilux99 Recommended Setups
- 15 minutes for 0 - 100 sqft
- 30 minutes for 100 - 200 sqft
- 60 minutes for 200 - 400 sqft

Depending on the types of surfaces you wish to disinfect: For harsher, rougher surfaces set the lamp on 30 minutes or 60 minutes. The further away an object or surface is from the light, the more exposure time is needed for sterilization.

Instructions: Remove the lamp cover and check whether there are any stains on the tube. If there are any stains, wipe them with alcohol. Removal all animals and plants from the room to ensure safety. No human should be in the room while Sterilux99 is in use. Press the on key, select disinfection time (15 minutes, 30 minutes, 60 minutes). Select 15 minutes for disinfection, press the key again, there will be a prompt tone (drop drop drop), it will automatically light up after 15 seconds for disinfection, and so on, select 30 minutes, press the confirm key, wait for 30 seconds, select 60 minutes, press the confirm key, wait for 60 seconds. After disinfection of the room, it is recommended to wait for 15 minutes before entering., Air out the disinfected room. Sterilux99 lamps produce short wave radiation that is lethal to bacteria, viruses, and other microorganisms, in the Air, on Surfaces, and in Water. Avoid exposure to direct or reflected germicidal ultraviolet rays. Germicidal ultraviolet rays are harmful to the eyes and skin. Sterilux99 is intended for indoor use only. Do not alter the construction or design. Do not remove safety labels or devices. Do not use the equipment for other than its intended purpose, as described in the equipment manual.

Low-pressure mercury vapor has a strong emission line at 254 nm, which is within the range of wavelengths that demonstrate a strong disinfection effect. Germicidal disinfection by exposure to ultraviolet (UV) light is seeing rapid deployment in food, pharmaceutical, hospitality, and medical markets throughout the world due to the effectiveness, ease of use, and adaptability.

SteriLux99 sterilization rate of ≥99%
Lamp life ≥ 8000 hours
Size: approx 21" Tall x 2.5" Wide (533 x 60 mm)
Wattage: 36W
Three remote control timing settings
360° unobstructed disinfection
Mobile tripod
International standard two-pin plugged power cord

Contents include Quarts Sterilizing Lamp, UV Bulb Protection Cover, Tripod Mount, TCL AC Power Cord, and Remote Control.

KILL ALL THAT S#!T

Can I stay in the Room while using SteriLux99?

No human, pet, or plant should be in a room that is being sanitized with SteriLux99 UVC light bulb. No, no one should be in the Room while using SteriLux99™. Remove plants and pets as well. Do not look directly at the UV lamp.


Where should I set up the lamp in the room?

Setup the lamp in the middle of the room on the floor or a small table. Make sure that the UV light from the lamp reaches all the areas you wish to disinfect.


How long do have to use the lamp for it to disinfect?

Our recommendations related to distance and surface exposure time: 15 minutes for 0 - 100 sq. ft 30 minutes for 100 - 200 sq. ft 60 minutes for 200 - 400 sq. ft It also depends on the types of surfaces you wish to disinfect, for harsher, rougher surfaces set the lamp on 30 minutes or 60 minutes. The further away an object or surface is from the light, the more exposure time is needed for sterilization. Objects that are further away from the light will still be sanitized; they just need a longer exposure period if they are further away.


Is there a residual odor after disinfection?

With the use of these devices, it has been often noticed that there is a residual odor after disinfection, otherwise known as volatile organic compounds (VOCs). This odor is the result of the breakdown of dust during disinfection. A recent study by Dr. Normand Brais about residual odors from UVC disinfection has been published showing information on how UV irradiation of keratin and cysteine in dust particles from the air emit chemical byproducts of thiol and mercaptan molecules, which contain a significant amount of sulfur.


More Info on CDC. According to CDC Germicidal UV Lamps:

Ultraviolet germicidal irradiation (UVGI) 0.5–950 J/cm2 Passed FFR filtration performance! Antimicrobial efficacy 99.9% for all tested viruses. For More Info https://www.cdc.gov/coronavirus/2019-ncov/hcp/ppe-strategy/decontamination-reuse-respirators.html SteriLux99 was not tested by the CDC or any other government agencies.


Can I use SteriLux99 in my office? Hotel? Waiting Room? Showroom? Medical office?

Absolutely! SteriLux99 has been developed for commercial and personal applications. You can cover up to 430 sq. ft with 1 unit. For a bigger space, you will need additional units to cover the intended area at once.


Where do you ship from?

We ship directly from Florida. SteriLux99 undergoes quality testing in France, once the units pass the quality testing they are shipped to Florida. SteriLux99 is our newest model, which in addition to all the testing that has already been done, is currently going through an array of extensive testing in a specialized Switzerland laboratory.


As you can see, we strive to offer your solutions of the highest possible quality!